SweetFX Settings DB
Latest forum threads
12 minutes ago
53 minutes ago
1 hour, 52 minutes ago
2 hours, 3 minutes ago
by Olhag

K-putt'e Config

Preset for Far Cry 4
Created by K-putt
Added Nov. 16, 2014
Shader used: SweetFX 1.5
Preset description:
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• • CeeJay.dk released a new SweetFX Version. 1.5.1 • I added all his new and updated Shaders to Boulotaur2024's Injector which has x64 support. • I also added a Chromatic Aberration Shader to this version. • You'll need this Version to get the same results as me. • DOWNLOAD HERE • sFX.TheLazy - http://goo.gl/W2kZQQ • For questions or requests visit the forum - http://sfx.thelazy.net/forum/ • Or visit the official SweetFX subreddit - http://www.reddit.com/r/sweetfx ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• K-putt'e Fart Cry 4 Config •SMAA •LUMASHARPEN •LEVELS •GAUSSIAN - UNSHARP •TONEMAP •VIBRANCE •CURVES •DITHER •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Download preset Show / Hide settings
/*-----------------------------------------------------------. / Description / '------------------------------------------------------------/ Game: Far Cry 4 Author: K-putt SweetFX version: 1.5.1/Boulotaur2024 Injector. +Chromatic Aberration Shader. Description: $$\ $$\ $$\ $$\ $$\ $$$$$$\ $$$$$$\ $$\ $$ | $$ | $$ | $$ | $ | $$ __$$\ $$ __$$\ \__| $$ |$$ / $$$$$$\ $$\ $$\ $$$$$$\ $$$$$$\ \_/ $$$$$$\ $$ / \__| $$$$$$\ $$$$$$$\ $$ / \__|$$\ $$$$$$\ $$$$$ / $$$$$$\ $$ __$$\ $$ | $$ |\_$$ _| \_$$ _| $$ __$$\ $$ | $$ __$$\ $$ __$$\ $$$$\ $$ |$$ __$$\ $$ $$< \______|$$ / $$ |$$ | $$ | $$ | $$ | $$$$$$$$ | $$ | $$ / $$ |$$ | $$ |$$ _| $$ |$$ / $$ | $$ |\$$\ $$ | $$ |$$ | $$ | $$ |$$\ $$ |$$\ $$ ____| $$ | $$\ $$ | $$ |$$ | $$ |$$ | $$ |$$ | $$ | $$ | \$$\ $$$$$$$ |\$$$$$$ | \$$$$ | \$$$$ | \$$$$$$$\ \$$$$$$ |\$$$$$$ |$$ | $$ |$$ | $$ |\$$$$$$$ | \__| \__| $$ ____/ \______/ \____/ \____/ \_______| \______/ \______/ \__| \__|\__| \__| \____$$ | $$ | $$\ $$ | $$ | \$$$$$$ | \__| \______/ K-putt'e Fart Cry 4 Config •SMAA •LUMASHARPEN •LEVELS •GAUSSIAN - UNSHARP •TONEMAP •VIBRANCE •CURVES •DITHER *--------------------------------------------------------* | Optional | *--------------------------------------------------------* •Disable SMAA in SweetFX since the game itself already uses SMAA. (Using sFX post-AA over a different post-AA method can cause artefacts.) *--------------------------------------------------------* | Updates | *--------------------------------------------------------* *--------------------------------------------------------* | Miscellaneous | *--------------------------------------------------------* • CeeJay.dk released a new SweetFX Version. 1.5.1 • I added all his new and updated Shaders to Boulotaur2024's Injector which has x64 support. • I also added a Chromatic Aberration Shader to this version. • You'll need this Version to get the same results as me. • DOWNLOAD HERE • sFX.TheLazy - http://goo.gl/W2kZQQ • For questions or requests visit the forum - http://sfx.thelazy.net/forum/ • Or visit the official SweetFX subreddit - http://www.reddit.com/r/sweetfx /*-----------------------------------------------------------. / Choose effects / '-----------------------------------------------------------*/ // Set to 1 for ON or 0 for OFF #define USE_SMAA_ANTIALIASING 1 //[0 or 1] SMAA Anti-aliasing : Smoothens jagged lines using the SMAA technique. #define USE_FXAA_ANTIALIASING 0 //[0 or 1] FXAA Anti-aliasing : Smoothens jagged lines using the FXAA technique #define USE_CA 0 //[0 or 1] Chromatic aberration. You can only use Chromatic Aberration OR the Explosion Shader. Not both at the same time. #define USE_EXPLOSION 0 //[0 or 1] Explosion : Scatters the pixels, making the image look fuzzy. #define USE_CARTOON 0 //[0 or 1] Cartoon : "Toon"s the image.(Interferes with SMAA, CRT, Bloom, HDR and Lumasharpen) #define USE_LEVELS 1 //[0 or 1] Levels : Sets a new black and white point. This increases contrast but causes clipping. Use Curves instead if you want to avoid that. #define USE_ADVANCED_CRT 0 //[0 or 1] Advanced CRT : Simulates an old CRT TV display. Set gaussian blur along with it to get a halation effect #define USE_BLOOM 0 //[0 or 1] Bloom : Makes bright lights bleed their light into their surroundings (relatively high performance cost) #define USE_HDR 0 //[0 or 1] HDR : Not actual HDR - It just tries to mimic an HDR look (relatively high performance cost) #define USE_LUMASHARPEN 1 //[0 or 1] LumaSharpen : Also sharpens the antialiased edges which makes them less smooth - I'm working on fixing that. #define USE_GAUSSIAN 1 //[0 or 1] Gaussian Blur : can be used to... blur, but also bloom/hazy/glowy look, also unsharp masking #define USE_FILMGRAIN 0 //[0 or 1] Filmgrain effect #define USE_TECHNICOLOR 0 //[0 or 1] TECHNICOLOR : Attempts to mimic the look of an old movie using the Technicolor three-strip color process (Techicolor Process 4) #define USE_DPX 0 //[0 or 1] Cineon DPX : Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor. #define USE_MONOCHROME 0 //[0 or 1] Monochrome : Monochrome makes the colors disappear. #define USE_LIFTGAMMAGAIN 0 //[0 or 1] Lift Gamma Gain : Adjust brightness and color of shadows, midtones and highlights (avoids clipping) #define USE_TONEMAP 1 //[0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach and defog. (may cause clipping) #define USE_VIBRANCE 1 //[0 or 1] Vibrance : Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. #define USE_CURVES 1 //[0 or 1] Curves : Contrast adjustments using S-curves. #define USE_SEPIA 0 //[0 or 1] Sepia : Sepia tones the image. #define USE_VIGNETTE 0 //[0 or 1] Vignette : Darkens the edges of the image to make it look more like it was shot with a camera lens. May cause banding artifacts. #define USE_DITHER 1 //[0 or 1] Dither : Applies dithering to simulate more colors than your monitor can display. This lessens banding artifacts (mostly caused by Vignette) #define USE_BORDER 0 //[0 or 1] Border : Makes the screenedge black as a workaround for the bright edge that forcing some AA modes sometimes causes. #define USE_SPLITSCREEN 0 //[0 or 1] Splitscreen : Enables the before-and-after splitscreen comparison mode. #define USE_CUSTOM 0 //[0 or 1] Custom : Write your own shader by editing custom.h, and then enable it here. /*-----------------------------------------------------------. / SMAA Anti-aliasing settings / '-----------------------------------------------------------*/ #define SMAA_THRESHOLD 0.08 //[0.05 to 0.20] Edge detection threshold. If SMAA misses some edges try lowering this slightly. I prefer between 0.08 and 0.12. #define SMAA_MAX_SEARCH_STEPS 25 //[0 to 98] Determines the radius SMAA will search for aliased edges #define SMAA_MAX_SEARCH_STEPS_DIAG 12 //[0 to 16] Determines the radius SMAA will search for diagonal aliased edges #define SMAA_CORNER_ROUNDING 0 //[0 to 100] Determines the percent of antialiasing to apply to corners. 0 seems to affect fine text the least so it's the default. // -- Advanced SMAA settings -- #define COLOR_EDGE_DETECTION 1 //[0 or 1] 1 Enables color edge detection (slower but slightly more acurate) - 0 uses luma edge detection (faster) #define SMAA_DIRECTX9_LINEAR_BLEND 0 //[0 or 1] Using DX9 HARDWARE? (software version doesn't matter) if so this needs to be 1 - If not, leave it at 0. //Enable this only if you use a Geforce 7xxx series or older card, or a Radeon X1xxx series or older card. /*-----------------------------------------------------------. / FXAA Anti-aliasing settings / '-----------------------------------------------------------*/ #define FXAA_QUALITY__PRESET 39 //[1 to 39] Choose the quality preset. 39 is the highest quality. #define fxaa_Subpix 0.4 //[0.000 to 1.000] Choose the amount of sub-pixel aliasing removal. #define fxaa_EdgeThreshold 0.01 //[0.000 to 1.000] Edge detection threshold. The minimum amount of local contrast required to apply algorithm. #define fxaa_EdgeThresholdMin 0.01 //[0.000 to 1.000] Darkness threshold. Trims the algorithm from processing darks. /*-----------------------------------------------------------. / Chromatic aberration / '-----------------------------------------------------------*/ #define outfocus 0.006 //[0.00 to 1.000] How strong the effect should be. /*-----------------------------------------------------------. / Explosion settings / '-----------------------------------------------------------*/ #define Explosion_Radius 3.0 //[0.2 to 100.0] Amount of effect you want. /*-----------------------------------------------------------. / Cartoon settings / '-----------------------------------------------------------*/ #define CartoonPower 8.0 //[0.1 to 10.0] Amount of effect you want. #define CartoonEdgeSlope 2.0 //[0.1 to 8.0] Raise this to filter out fainter edges. You might need to increase the power to compensate. Whole numbers are faster. /*----------------------------------------------------------. / Levels settings / '----------------------------------------------------------*/ #define Levels_black_point 1 //[0 to 255] The black point is the new black - literally. Everything darker than this will become completely black. Default is 16.0 #define Levels_white_point 255 //[0 to 255] The new white point. Everything brighter than this becomes completely white. Default is 235.0 //Colors between the two points will stretched, which increases contrast, but details above and below the points are lost (this is called clipping). // -- Debug settings -- #define Levels_highlight_clipping 0 //[0 or 1] Highlight the pixels that clip. Red = Some detail is lost in the highlights, Yellow = All detail is lost in the highlights, // Blue = Some detail is lost in the shadows, Cyan = All detail is lost in the shadows. /*----------------------------------------------------------. / Advanced CRT settings / '----------------------------------------------------------*/ #define CRTAmount 1.00 //[0.00 to 1.00] Amount of CRT effect you want #define CRTResolution 1.0 //[1.0 to 8.0] Input size coefficent (low values gives the "low-res retro look"). Default is 1.2 #define CRTgamma 2.2 //[0.0 to 4.0] Gamma of simulated CRT (default 2.2) #define CRTmonitorgamma 2.4 //[0.0 to 4.0] Gamma of display monitor (typically 2.2 is correct) #define CRTBrightness 1.2 //[1.0 to 3.0] Used to boost brightness a little. Default is 1.0 #define CRTScanlineIntensity 2.0 //[2.0 to 4.0] Scanlines intensity (use integer values preferably). Default is 2.0 #define CRTScanlineGaussian 1 //[0 or 1] Use the "new nongaussian scanlines bloom effect". Default is on #define CRTCurvature 1 //[[0 or 1] "Barrel effect" enabled (1) or off (0) #define CRTCurvatureRadius 2.0 //[0.0 to 2.0] Curvature Radius (only effective when Curvature is enabled). Default is 1.5 #define CRTCornerSize 0.0100 //[0.0000 to 0.0020] Higher values, more rounded corner. Default is 0.001 #define CRTDistance 2.00 //[0.00 to 4.00] Simulated distance from viewer to monitor. Default is 2.00 #define CRTAngleX 0.00 //[-0.20 to 0.20] Tilt angle in radians (X coordinates) #define CRTAngleY -0.15 //[-0.20 to 0.20] Tilt angle in radians (Y coordinates). (Value of -0.15 gives the 'arcade tilt' look) #define CRTOverScan 1.00 //[1.00 to 1.10] Overscan (e.g. 1.02 for 2% overscan). Default is 1.01 #define CRTOversample 0 //[0 or 1] Enable 3x oversampling of the beam profile (warning : performance hit) /*-----------------------------------------------------------. / Bloom settings / '-----------------------------------------------------------*/ #define BloomThreshold 20.25 //[0.00 to 50.00] Threshold for what is a bright light (that causes bloom) and what isn't. #define BloomPower 1.446 //[0.000 to 8.000] Strength of the bloom #define BloomWidth 0.0142 //[0.0000 to 1.0000] Width of the bloom /*-----------------------------------------------------------. / HDR settings / '-----------------------------------------------------------*/ #define HDRPower 1.30 //[0.00 to 8.00] Strangely lowering this makes the image brighter #define radius2 0.87 //[0.00 to 8.00] Raising this seems to make the effect stronger and also brighter /*-----------------------------------------------------------. / LumaSharpen settings / '-----------------------------------------------------------*/ // -- Sharpening -- #define sharp_strength 0.7 //[0.10 to 3.00] Strength of the sharpening #define sharp_clamp 0.01 //[0.000 to 1.000] Limits maximum amount of sharpening a pixel recieves - Default is 0.035 // -- Advanced sharpening settings -- #define pattern 2 //[1|2|3|4] Choose a sample pattern. 1 = Fast, 2 = Normal, 3 = Wider, 4 = Pyramid shaped. #define offset_bias 1.0 //[0.0 to 6.0] Offset bias adjusts the radius of the sampling pattern. //I designed the pattern for offset_bias 1.0, but feel free to experiment. // -- Debug sharpening settings -- #define show_sharpen 0 //[0 or 1] Visualize the strength of the sharpen (multiplied by 4 to see it better) /*-----------------------------------------------------------. / Gaussian Blur settings / '-----------------------------------------------------------*/ #define GaussEffect 1 //[0|1|2|3] 0 = Blur, 1 = Unsharpmask (expensive), 2 = Bloom, 3 = Sketchy. Default is 2 #define GaussQuality 1 //[0|1|2|3] Warning: 2 and 3 are expensive. Default is 1 #define GaussSigma 4 //[1 to 4] The higher the wider blur/bloom is (only effective when Bloom selected) #define GaussBloomWarmth 2 //[0|1|2] "Temperature" of the bloom - 0 = neutral, 1 = warm, 2 = hazy/foggy #define GaussThreshold 0.50 //[0.00 to 1.00] [DX10/11 only] Threshold for what is a bright light (that causes bloom) and what isn't. #define GaussExposure 43.0 //[0.00 to 100.00] [DX10/11 only] Exposure of the effect (the lower the brighter) #define GaussStrength 0.2 //[0.00 to 1.00] Amount of effect blended into the final image /*-----------------------------------------------------------. / Film grain settings / '-----------------------------------------------------------*/ #define FilmGrain_strength 0.08 //[0.01 to 1.00] How visible the grain is. Higher is more visible. #define FilmGrain_variance 0.16 //[0.01 to 1.00] Controls the variance of the gaussian noise. Lower values look smoother. /*-----------------------------------------------------------. / TECHNICOLOR settings / '-----------------------------------------------------------*/ #define TechniAmount 0.46 //[0.00 to 1.00] #define TechniPower 4.0 //[0.00 to 8.00] #define redNegativeAmount 0.74 //[0.00 to 1.00] #define greenNegativeAmount 0.83 //[0.00 to 1.00] #define blueNegativeAmount 0.9 //[0.00 to 1.00] /*-----------------------------------------------------------. / Cineon DPX settings / '-----------------------------------------------------------*/ #define Red 8.0 //[1.0 to 15.0] #define Green 8.0 //[1.0 to 15.0] #define Blue 8.0 //[1.0 to 15.0] #define ColorGamma 4.5 //[0.1 to 2.5] Adjusts the colorfulness of the effect in a manner similar to Vibrance. 1.0 is neutral. #define DPXSaturation 0.3 //[0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral. #define RedC 0.35 //[0.60 to 0.20] #define GreenC 0.35 //[0.60 to 0.20] #define BlueC 0.3 //[0.60 to 0.20] #define Blend 0.1 //[0.00 to 1.00] How strong the effect should be. /*-----------------------------------------------------------. / Monochrome settings / '-----------------------------------------------------------*/ #define Monochrome_conversion_values float3(0.18,0.41,0.41) //[0.00 to 1.00] Percentage of RGB to include (should sum up to 1.00) /*-----------------------------------------------------------. / Lift Gamma Gain settings / '-----------------------------------------------------------*/ #define RGB_Lift float3(1.0, 1.0, 1.0) //[0.000 to 2.000] Adjust shadows for Red, Green and Blue #define RGB_Gamma float3(1.0, 1.0, 1.0) //[0.000 to 2.000] Adjust midtones for Red, Green and Blue #define RGB_Gain float3(1.0, 1.0, 1.0) //[0.000 to 2.000] Adjust highlights for Red, Green and Blue /*-----------------------------------------------------------. / Tonemap settings / '-----------------------------------------------------------*/ #define Gamma 0.99 //[0.000 to 2.000] Adjust midtones #define Exposure 0.0 //[-1.000 to 1.000] Adjust exposure #define Saturation -0.12 //[-1.000 to 1.000] Adjust saturation #define Bleach 0.0 //[0.000 to 1.000] Brightens the shadows and fades the colors #define Defog 0.4 //[0.000 to 1.000] How much of the color tint to remove #define FogColor float3(0.02, 0.02, 0.02) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to remove - default is blue /*-----------------------------------------------------------. / Vibrance settings / '-----------------------------------------------------------*/ #define Vibrance 0.4 //[-1.00 to 1.00] Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. #define Vibrance_RGB_balance float3(0.4, 0.2, 1.1) //[-10.00 to 10.00,-10.00 to 10.00,-10.00 to 10.00] A per channel multiplier to the Vibrance strength so you can give more boost to certain colors over others /*-----------------------------------------------------------. / Curves settings / '-----------------------------------------------------------*/ #define Curves_mode 0 //[0|1|2] Choose what to apply contrast to. 0 = Luma, 1 = Chroma, 2 = both Luma and Chroma. Default is 0 (Luma) #define Curves_contrast 1.0 //[-1.00 to 1.00] The amount of contrast you want // -- Advanced curve settings -- #define Curves_formula 13 //[1|2|3|4|5|6|7|8|9|10] The contrast s-curve you want to use. //1 = Sine, 2 = Abs split, 3 = Smoothstep, 4 = Exp formula, 5 = Simplified Catmull-Rom (0,0,1,1), 6 = Perlins Smootherstep //7 = Abs add, 8 = Techicolor Cinestyle, 9 = Parabola, 10 = Half-circles. //Note that Technicolor Cinestyle is practically identical to Sine, but runs slower. In fact I think the difference might only be due to rounding errors. //I prefer 2 myself, but 3 is a nice alternative with a little more effect (but harsher on the highlight and shadows) and it's the fastest formula. /*-----------------------------------------------------------. / Sepia settings / '-----------------------------------------------------------*/ #define ColorTone float3(1.26, 1.10, 0.80) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to tint the image #define GreyPower 0.0 //[0.00 to 1.00] How much desaturate the image before tinting it #define SepiaPower 0.2 //[0.00 to 1.00] How much to tint the image /*-----------------------------------------------------------. / Vignette settings / '-----------------------------------------------------------*/ #define VignetteType 1 //[1|2|3] 1 = Original, 2 = New, 3 = TV style #define VignetteRatio 1.00 //[0.15 to 6.00] Sets a width to height ratio. 1.00 (1/1) is perfectly round, while 1.60 (16/10) is 60 % wider than it's high. #define VignetteRadius 1.00 //[-1.00 to 3.00] lower values = stronger radial effect from center #define VignetteAmount -0.40 //[-2.00 to 1.00] Strength of black. -2.00 = Max Black, 1.00 = Max White. #define VignetteSlope 1 //[2 to 16] How far away from the center the change should start to really grow strong (odd numbers cause a larger fps drop than even numbers) #define VignetteCenter float2(0.500, 0.500) //[0.000 to 1.000, 0.000 to 1.000] Center of effect for VignetteType 1. 2 and 3 do not obey this setting. /*-----------------------------------------------------------. / Dither settings / '-----------------------------------------------------------*/ #define dither_method 2 //[1 or 2] 1 = Ordered dithering (very good and very fast), 2 = Random dithering (different but slightly slower dithering) //Note that the patterns used by Dither, makes an image harder to compress. //This can make your screenshots and video recordings take up more space. /*-----------------------------------------------------------. / Border settings / '-----------------------------------------------------------*/ #define border_width float2(0,0) //[0 to 2048, 0 to 2048] (X,Y)-width of the border. Measured in pixels. If this is set to 0,0 then the border_ratio will be used instead #define border_ratio float(2.0 / 1.0) //[0.1000 to 10.0000] Set the desired ratio for the visible area. You MUST use floating point - Integers do not work right. //Examples that work: (1680.0 / 1050.0), (16.0 / 10.0), (1.6) Examples that does NOT work right: (1680 / 1050), (16 / 10) #define border_color float3(0, 0, 0) //[0 to 255, 0 to 255, 0 to 255] What color the border should be. In integer RGB colors, meaning 0,0,0 is black and 255,255,255 is full white. /*-----------------------------------------------------------. / Splitscreen settings / '-----------------------------------------------------------*/ #define splitscreen_mode 1 //[1|2|3|4|5|6] 1 = Vertical 50/50 split, 2 = Vertical 25/50/25 split, 3 = Vertical 50/50 angled split, // 4 = Horizontal 50/50 split, 5 = Horizontal 25/50/25 split, 6 = Curvy vertical 50/50 split /*-----------------------------------------------------------. / Key settings / '-----------------------------------------------------------*/ // This is the section where you can define your own key mapping // See the following URL to find out what keycode a key has: // http://www.cambiaresearch.com/articles/15/javascript-char-codes-key-codes // key_toggle_sweetfx = 45 ; 45 = Einfg // key_screenshot = 35 ; 35 = Ende-> // key_reload_sweetfx = 46 ; 46 = Entf /*-----------------------------------------------------------. / Misc settings / '-----------------------------------------------------------*/ // You can load and chain other DirectX wrappers (ENB, Helix, Windower...) // If the external wrapper is already named d3d9.dll, rename it into // something else like "d3d9_enb.dll" (note that even if this is commented it actually works) // external_d3d9_wrapper = // external_dxgi_wrapper =

Comments

deton24
4 Jun 19:18 CEST

Well, it still works on W10. You simply need to download Reshade with SweetFX
https://yadi.sk/d/mdBALIXn3XoSo6
and rename downloaded preset file to SweetFX_Settings.txt and put in SweetFX folder after you install that Reshade in bin folder. But I don't know whether all the shaders you used are attached there, because the result is pretty cosmetic.

K-putt
1 Jun 19:33 CEST

This preset doesn't work anymore since the injector i used doesn't support the new directX api's on Windows 8-10. It would work on a Windows 7 machine tho.

And no, SweetFX/ReShade never needed an exe. ReShade has one for ease of setup. But it's not needed and can be done manually.

Kjersleif
1 Jun 17:05 CEST

Can't get this to work. :(
Windows 10 64-bit.

I'm fairly new to SweetFX. I downloaded the version with the Boulotaur2024 Injector, but there's no "sweetfx.exe" or similar? Doesn't it require an exe? Do I have to install the normal SweetFX 1.5.1 in the bin folder first, and then overwrite with the Boulotaur2024 package (and the 64-bit .dll files ofc)?
#Confused

Error message:
FarCry4.exe - Entry Point Not Found
The procedure entry point CreateDXGIFactory2 could not be located in the dynamic link library C:\WINDOWS\SYSTEM32\d3d11.dll.

schnubbel76
6 Nov 10:57 CET

Nice preset again. Works without trouble with Reshade+Sweetfx 2.0

derrame
16 Mar 00:46 CET

doesn't work for me, the game crashes at launch

shadow85
16 Feb 10:10 CET

Is it normal that after using radeonPro to load this Sweetfx that I cannot select any graphic's quality setting for 'shadows', 'postFX', and 'godrays' ingame. And my shadows look super blocky ingame.

brandonhortman
11 Jan 02:05 CET

Man it just crashes every time on load up.
I installed it to the folder with the exe, then copied over the dll from x64.
No dice. Crashes right after the small FC4 screen every single time. No idea what to do.

Freeman
21 Dec 15:52 CET

An other great preset.
Thanks man

Dennis98
11 Dec 23:26 CET

Very nice preset again! Would do it the same :)

K-putt
6 Dec 21:40 CET

Ah that error again. I still haven't figured out what's causing this. So no idea how to fix this. Sorry!

jonathan1107
6 Dec 16:29 CET

im using the x64 of course yes:

here's what the log says:

22:30:57] D3D11CreateDeviceAndSwapChain redirected successfully
[22:30:57] Hooking swapchain...
[22:30:57] D3D10CreateDeviceAndSwapChain failed: 0000000080070057 !
[22:31:01] D3D11CreateDeviceAndSwapChain failed: 0000000080070057 !

K-putt
6 Dec 14:48 CET

You should always check the log.log file before anything else. You're also using the x64 .dll's?

jonathan1107
5 Dec 17:09 CET

Can't get SweetFX to work with Far Cry 4. Using windows 7 64 bit. Downloaded the linked sweetfx in description, installed and everything. Tried toggling fullscreen vs borderless, tried the d3d compatibility function, tried running as admin, tried "reloading" sweetfx whilst in game, tried everything I know... still can't get it to work.

I do use rivatuner statistics overlay (which goes along with MSI afterburner) and tried everything I know... still can't get it to work...

I'm getting so frustrated with sweetfx... Everytime I want to use it with a game, it's always a war between me and small settings until the god damn thing finally works and gives me that extra layer of beauty

billtaco
30 Nov 13:27 CET

really work sir ~~

billtaco
30 Nov 12:09 CET

sorry sir
My sweetfx cant work
i just downlaod this :sFX.TheLazy - http://goo.gl/W2kZQQ
and download your settings :
http://sfx.thelazy.net/games/preset/2527/download/
and use your settings to replace the SweetFX_settings file
as in my Win 7 64x why not work ???

Raztaman
24 Nov 21:55 CET

Can't get this to work on Windows 8.1 x64... Without radeonpro I get a createdxgi error and with radeonpro (I'm sure I've followed the correct method), the game just gives me a "Stopped working error" even with Uplay overlay disabled... Any suggestions?

Celice
24 Nov 07:20 CET

Thanks for the reply. I don't have any overlay such as uplay or programs like fraps or afterburner running in the background.

What are some other possible solutions or issues? thanks :)

Ghoster
21 Nov 22:33 CET

I tried again with sweetfx and this time it worked :) thanks!

K-putt
21 Nov 19:47 CET

You won't get the same results as me with eFX though. That injector package doesn't have the gaussian shader.

Ghoster
21 Nov 19:31 CET

Hello, it doesn't work for me with regular sweetfx, but works with sweetfx+efx :)

like always best preset there is. Maybe a tiny bit darker in some situations, still looks great.

Thank you K.

K-putt
21 Nov 16:05 CET

Try to disable uplay's overlay.

Celice
21 Nov 07:45 CET

I get a crash when loading this sweetfx you have linked. I used the x64 dll as suggested,

[22:41:45] D3D11CreateDeviceAndSwapChain redirected successfully
[22:41:45] Hooking swapchain...
[22:41:45] D3D10CreateDeviceAndSwapChain failed: 0000000080070057 !
[22:41:49] D3D11CreateDeviceAndSwapChain redirected successfully
[22:41:51] ResizeBuffers succeeded !
[22:41:51] Created DeferredContext successfully !
[22:41:51] Initializing SMAA (width: 1920, height: 1080)...
[22:41:51] SMAA enabled

I try disable SMAA in shader_setting in case, then crash about FXAA.dll, but I didn't enable FXAA either.

Is there an in-game setting that needs to be disabled first?

K-putt
16 Nov 19:51 CET

Before. Sometimes it works if you start it afterwards. But it doesn't work here.

roZay
16 Nov 19:44 CET

Do you start it before or after you start the game? It does not work for me, no osd/can't take pics if the sweetFX is working.

K-putt
16 Nov 18:46 CET

I'm using DxTory. It captures the sFX effects.

QTmodz
16 Nov 13:29 CET

roZay

use a free software called IrfanView

roZay
16 Nov 12:37 CET

Allright I got it to work somehow. But it saves pictures as .dds where do I tweak for png?

roZay
16 Nov 12:01 CET

@Quention, I have an Nvidia.

It's very weird if I press insert I see difference in the first videos where the game is loading. But in the menu no. When the game starts when I press insert it goes black and it gets fucked up as if I've pressed ALT+Enter which when I do zooms in x4 and then becomes black again wtf is this shit. I think there's some problem with the download, If I drag and drop in extracts but If I click on extract I get a bunch of errors. Downloaded a few times.

Swehttham
16 Nov 03:51 CET

I never used sweetfx knew now was wondering how do I install, help please.

QTmodz
16 Nov 02:59 CET

Nice :)

Got to get myself NVIDIA card!

K-putt
16 Nov 02:09 CET

Downsampling.

QTmodz
16 Nov 02:02 CET

Do you have a 4k monitor or do you use Downsampling?

QTmodz
16 Nov 01:58 CET

roZay

I had the same prob when making my preset!

So RadeonPro was my only way out. And even that randomly stop working at the start lol

Plus i am not new to SweetFX or Radeonpro.
either.

Working good for me now do :) Thing has a mind of it's own

roZay
16 Nov 01:35 CET

Not working on/off. If I press end it saves screenshot but no effects. If I set it to splitscreen to test it the game crashes. Never had problem like this with SFX. No 3rd party programs which could influence it running.

K-putt
16 Nov 01:18 CET

Works flawlessly with boulotaurs injector. Just don't forget to use the x64 dxgi.dll.

QTmodz
16 Nov 00:53 CET

Mr K

Did you figure away to get it working without RadeonPro?

Pro can really mess up settings sometimes :)

You need to be logged in to post a comment